HENDRICK
PANEL SAW
CNC CONTROL
TABLE 120 X 120
THK. UP TO 5"
TOLERANCES +\- .005 UP TO 1" THK
+\- .020 1" TO 3" "
+\- .030 3" TO 5" "
MAZAK SUPER QUICK TURN 15M
CONTROL T32-3
CHUCK 8" KITAGAWA
STANDARD MACHINING DIA. 10.87
MAXIMUM MACHINING DIA. 11.81
BAR CAPACITY 2" - MAX O.D. OF ROD / MINIMUM O.D. 5/16"
· Anything over 2" should be looked at. We are able to make larger parts.
MAXIMUM MACHINING LENGTH 20"
LIVE LOOLING
# TOOLS 12
MAXIMUM SPINDLE SPEED 5000
OKUMA CADET 1420/650BB
CONTROL OSP 700L
CHUCK 15" KITAGAWA
STANDARD MACHINING DIA. 13"
MAXIMUM MACHINING DIA. 14.17"
BAR CAPACITY 4" - MAX O.D. OF ROD / MINIMUM O.D. 1"
· If over 4" O.D., part may be able to be ran Mazak.
MAXIMUM MACHINING LENGTH 24"
# TOOLS 12
MAXIMUM SPINDLE SPEED 3200
TREE VMC 1050
CONTROL DYNAPATH DELTA 30
TABLE SIZE X = 50" Y = 22.8"
MAXIMUM WORK AREA X = 40"
Y = 19.5"
Z = 12" WITH TOOL
SPINDLE SPEED 30 - 8000
# TOOLS 24 40 TAPER
MAXIMUM TOOL DIA. 3.5"
MAXIMUM TOOL DIA. WITH 2nd. SLOT FREE 6.3"
TREE VMC 760
CONTROL DYNAPATH DELTA 50
TABLE SIZE X = 36 Y = 18.5
MAXIMUM WORK AREA X = 30"
Y = 16"
Z = 11" WITH TOOL
SPINDLE SPEEDS 0- 8000
# TOOLS 20 40 TAPER
MAXIMUM TOOL DIA. 3.5"
MAXIMUM TOOL DIA. WITH 2nd SLOT FREE 4.3"
HAAS VF 4
TABLE SIZE X = 52 Y = 20
MAXIMUM WORK AREA X = 50"
Y = 20"
Z = 12 " WITH TOOL
SPINDLE SPEEDS 0- 10,000
# TOOLS 24 40 TAPER
KIRA VTC 30
CONTROL FANUC G CODE
TABLE SIZE X = 19.7" Y = 12.6"
MAXUMUM WORK AREA X = 15.7"
Y = 9.8"
Z = 8"
SPINDLE SPEEDS 200 - 8000
# TOOLS 10 BT 30 TAPER
MAXIMUM TOOL DIA. 3"
TOOL CHANGE TIME (TOOL TO TOOL) 1.5 SEC.
TOOL CHANGE TIME (CHIP TO CHIP) 2.8 SEC.
HENDRICK CITATION CNC ROUTER
CONTROL FANUC TOUCH SCREEN G CODE
TABLE SIZE X = 60 Y = 120
SPINDLES (2) 18000 MAX. RPM WITH TOOL CHANGERS
# TOOLS 12 (6 PER HEAD)
HAAS GR512
SINGLE HEAD
TABLE SIZE X=60 Y= 144
Z AXIS = 24"
20 TOOL CHANGER
10,000 RPM SPINDLE
15 HPHAAS TM2 TOOL ROOM MILL
CNC HAAS CONTROL WITH INTUITIVE PROGRAMMING
TABLE SIZE 10.5 X 57.75 INCHES
TRAVEL 40”X 16” X 16” (XYZ)
7.5 HP @ 4000 RPM HIGH SPEED MACHINING
1000 LB TABLE CAPACITY
40 TAPER SPINDLE
20 STATION AUTOMATIC TOOL CHANGER
3.5” MAX. TOOL DIAMETER
ACCURACY IS +/- 0.0004 POSITIONING, +/-0.0002 REPEATABILITY
FLOOD COOLANT
MARPOSS PROBING SYSTEM
HAAS SL 30 TURNING CENTER
CNC HAAS CONTROL WITH INTUITIVE PROGRAMMING
10” KITAGAWA CHUCK
39” BETWEEN CENTERS
17” MAX CUTTING DIAMETER
34” MAX CUTTING LENGTH
3” BAR THRU CHUCK
30 HP @ 3400 RPM
VDI 12 STATION HYBRID TURRET
LIVE TOOLING AND C AXIS
HIGH PRESSURE COOLANT 300 PSI WITH AIR BLAST
TOOL PRESETTER
FULLY PROGRAMMABLE HYDRAULIC TAILSTOCK
| MANUAL EQUIPMENT |
- 4 VERTICAL MILLING MACHINES-WITH DIGITAL READOUTS
- 4 MANUAL LATHES- WITH DIGITAL READOUTS
- 3 TABLE SAWS
- 2 HORIZONTAL BAND SAWS
- PLANERS
- JOINTERS
- HAND ROUTERS
- PLASTIC WELDERS
- SHAPER
|
|
